Our wood products are impregnated with 100% natural linseed oil extracted from flax seeds.

The special feature of Saga impregnation is that the linseed oil is refined and egg whites, stearin and paraffin are removed from the oil. This means that the oil can effectively penetrate the wood and form a strong membrane that protects the wood and minimizes moisture absorption.
That's why we say: Saga Wood - Guarded by nature.

Our goal: on nature's own terms

Saga Wood has been developed with the aim of being the optimal Nordic Swan Ecolabeled decking and cladding in terms of exclusive appearance, long durability and minimal maintenance.

Through years of research and development, Saga Wood has undergone several quality-enhancing processes based on nature's own resources.

  • Selected high quality wood
  • Heat treatment
  • Wood preservation with refined linseed oil

Saga Wood is produced based on PEFC certified wood and is labeled with SVANEN which is also called Nordic Ecolabel. Through our way of treating the wood, we have not added harmful impregnating substances of any kind.

We believe in the environment and that responsible consumers can make a difference by making the right choice. The product is thus completely "green" and meets the requirements for the Nordic Swan Ecolabel.

WE HAVE SOLVED MANY THINGS, BUT NOT THE LAWS OF NATURE

To maintain Saga products, they should be inspected, cleaned and oiled at regular intervals.

TIP! Terraces made of wood from Saga Wood should be re-oiled after a year to maintain optimal appearance. The same is recommended for facade cladding. It is important to start cleaning from the bottom upwards to avoid streaks in the result. The surface where the cleaning water runs down should be 100% wet.

These are the treatment products we recommend:

SAGA OIL: Refined Saga Oil for regular maintenance of Saga Wood and other Saga treated wood and treatment of cut surfaces during assembly. Application: The wood is cleaned from dust and dirt. Neutralize new and treated wood with Saga Wood Cleaner. Stir well before application. Apply the oil in a very thin layer with a brush on a clean and dry surface. If applied too thickly, the drying time will be prolonged and unevenness may occur. Excess oil should be wiped off immediately with a dry cloth (when applying the oil, it should be absorbed quickly and there should NOT be shiny areas after 15-20 minutes). For normal maintenance, 1 application is sufficient. Drying time at an average temperature of 15º C is approximately 24 hours. The surface must not be loaded until the substrate is completely dry, but rain after the oil has been absorbed will not damage the treatment.

SAGA TRERENS: Against green algae and bacteria. Can be used on most surfaces to remove and protect the surface. Apply by watering can or spray and allow to dry! Remove all loose dirt before treatment. Scrubbing of the surface is not necessary. Do not rinse after application. Wood cleaner is long lasting and after 1-4 days of action, nature, with the help of rain and wind, will provide a clean surface. Applications: Specially developed for Saga Terrace floors, living walls, garden furniture, exterior panels, fences etc. Can also be used on materials such as brick, stone, tiles, plastic and painted surfaces. Test on a small area before starting treatment.